cookbook 'shorewall_ng', '= 0.5.01'
shorewall_ng (13) Versions 0.5.01 Follow2
Configures and install Shorewall 5
cookbook 'shorewall_ng', '= 0.5.01', :supermarket
knife supermarket install shorewall_ng
knife supermarket download shorewall_ng
shorewall_ng Cookbook
Description
This cookbook enables you to configure a shorewall5 on a debian/ubunto based os a transparent, easy and encapsulated way
Shorewall is a rather comprehensive and easy-to-use abstraction layer on top of iptables.
This cookbook installs, configures and manages Shorewall.
Release
bundle install --binstubs --without='development vagrant docker dokken integration' ./bin/stove login --username <user>--key ~/.ssh/key.pem # edit metadata.rb and release ./bin/stove
Tests
Run the test by using kitchen
chef exec kitchen test
Requirements
Chef
Tested on 12 and 15 but newer and older version should work just fine.
Platform
The following platforms have been tested with this cookbook, meaning that the recipes run on these platforms without error:
Ubuntu
-
Debian
(8/9/10)
Capabilities
It supports shorewall5, please see the recipes below.
Creates pretty Shorewall configuration files intended to be aesthetically
comparable to hand-written ones.
Recipes
shorewall_ng::default
This cookbook installs and configures shorewall on the your node.
Attributes
shorewall_ng::default
<table>
<tr>
<th>Key</th>
<th>Type</th>
<th>Description</th>
<th>Default</th>
</tr>
<tr>
<td><tt>['shorewall']['enabled']</tt></td>
<td>Boolean</td>
<td>Enable o disable Shorewall</td>
<td><tt>false</tt></td>
</tr>
<tr>
<td><tt>['shorewall']['default']['options']</tt></td>
<td>String</td>
<td>Global start/restart/stop options</td>
<td><tt></tt></td>
</tr>
<tr>
<td><tt>['shorewall']['default']['wait_interface']</tt></td>
<td>String</td>
<td>If your Shorewall configuration requires detection of the ip address of a ppp interface, you must list such interfaces in this attribute to get Shorewall to wait until the interface is configured</td>
<td><tt>false</tt></td>
</tr>
<tr>
<td><tt>['shorewall']['default']['startoptions']</tt></td>
<td>String</td>
<td>Start options</td>
<td><tt></tt></td>
</tr>
<tr>
<td><tt>['shorewall']['default']['restartoptions']</tt></td>
<td>String</td>
<td>Restart options</td>
<td><tt></tt></td>
</tr>
<tr>
<td><tt>['shorewall']['default']['initlog']</tt></td>
<td>String</td>
<td>Init Log. If it is /dev/null, will be used the STARTUP_LOG value defined in shorewall.conf</td>
<td><tt>/dev/null</tt></td>
</tr>
<tr>
<td><tt>['shorewall']['default']['safestop']</tt></td>
<td>Numeric</td>
<td>Set this to 1 to cause '/etc/init.d/shorewall stop' to place the firewall in a safe state rather than to open it</td>
<td><tt>0</tt></td>
</tr>
<tr>
<td><tt>['shorewall']['zones']</tt></td>
<td>Array</td>
<td>This is an array of hashes that contain the zones settings. Each item could have the following keys: <tt>zone</tt>, <tt>type</tt>, <tt>options</tt>, <tt>in_options</tt>, <tt>out_options</tt></td>
<td><tt>[]</tt></td>
</tr>
<tr>
<td><tt>['shorewall']['policy']</tt></td>
<td>Array</td>
<td>This is an array of hashes that contain the polices settings. Each item could have the following keys: <tt>source</tt>, <tt>dest</tt>, <tt>policy</tt>, <tt>log_level</tt>, <tt>limit</tt></td>
<td><tt>[]</tt></td>
</tr>
<tr>
<td><tt>['shorewall']['interfaces']</tt></td>
<td>Array</td>
<td>This is an array of hashes that contain the interfaces settings. Each item could have the following keys: <tt>zone</tt>, <tt>interface</tt>, <tt>broadcast</tt>, <tt>options</tt></td>
<td><tt>[]</tt></td>
</tr>
<tr>
<td><tt>['shorewall']['hosts']</tt></td>
<td>Array</td>
<td>This is an array of hashes that contain the hosts settings. Each item could have the following keys: <tt>zone</tt>, <tt>hosts</tt>, <tt>options</tt></td>
<td><tt>[]</tt></td>
</tr>
<tr>
<td><tt>['shorewall']['rules']</tt></td>
<td>Array</td>
<td>This is an array of hashes that contain the rules settings. Each item could have the following keys: <tt>action</tt>, <tt>source</tt>, <tt>dest</tt>, <tt>proto</tt>, <tt>dest_port</tt>, <tt>source_port</tt>, <tt>original_dest</tt>, <tt>rate_limit</tt>, <tt>user</tt>, <tt>fwmark</tt></td>
<td><tt>[]</tt></td>
</tr>
<tr>
<td><tt>['shorewall']['tunnels']</tt></td>
<td>Array</td>
<td>This is an array of hashes that contain the tunnels settings. Each item could have the following keys: <tt>type</tt>, <tt>zone</tt>, <tt>gateway</tt>, <tt>gateway_zones</tt></td>
<td><tt>[]</tt></td>
</tr>
<tr>
<td><tt>['shorewall']['masq']</tt></td>
<td>Array</td>
<td>This is an array of hashes that contain the masq/SNAT settings. Each item could have the following keys: <tt>interface</tt>, <tt>source</tt>, <tt>address</tt>, <tt>proto</tt>, <tt>ports</tt>, <tt>ipsec</tt>, <tt>mark</tt>, <tt>user</tt>, <tt>switch</tt></td>
<td><tt>[]</tt></td>
</tr>
</table>
For more details, see the attributes/default.rb
file.
Usage
Just include shorewall_ng
in your node's run_list
:
{ "name": "my_node", "run_list": ["recipe[shorewall_ng]"] }
You need to set the zones, policies, rules, zones, interfaces in order to manage Shorewall by using this cookbook.
Examples:
- Setting zones:
"shorewall": { "zones": [ { "zone": "fw", "type": "firewall" }, { "zone": "lan", "type": "ipv4" }, { "zone": "net", "type": "ipv4" } ] }
- Setting policies:
"shorewall": { "policy": [ { "source": "fw", "dest": "all", "policy": "ACCEPT" }, { "source": "lan", "dest": "fw", "policy": "REJECT", "log": "DEBUG" }, { "source": "all", "dest": "all", "policy": "REJECT" } ] }
- Setting interfaces
"shorewall": { "interfaces": [ { "zone": "net", "interface": "eth0", "broadcast": "detect", "options": "tcpflags,nosmurfs,routefilter,logmartians" }, { "zone": "lan", "interface": "eth1", "broadcast": "detect", "options": "tcpflags,nosmurfs,routefilter,logmartians" } ] }
- Setting rules
"shorewall": { "rules": [ { "description": "Don't allow connection pickup from the net", "action": "Invalid(DROP)", "source": "net", "dest": "all" }, { "description": "Accept DNS connections from the firewall to the network", "action": "DNS(ACCEPT)", "source": "fw", "dest": "net" }, { "description": "Accept NTP connections from the firewall to the network", "action": "NTP(ACCEPT)", "source": "fw", "dest": "net" }, { "description": "Incoming SSH to firewall", "source": "all", "dest": "fw", "proto": "tcp", "dest_port": 22, "action": "ACCEPT" }, { "description": "Accept HTTP/HTTPS connections to internet", "action": "Web(ACCEPT)", "source": "fw", "dest": "net" }, { "description": "Allow Ping from the local network", "action": "Ping(ACCEPT)", "source": "loc", "dest": "fw" }, { "description": "Drop Ping from the \"bad\" net zone.. and prevent your log from being flooded..", "action": "Ping(DROP)", "source": "net", "dest": "fw" }, { "description": "Drop Ping from the \"bad\" net zone.. and prevent your log from being flooded..", "action": "ACCEPT", "source": "fw", "dest": "loc", "proto": "icmp" }, { "description": "Drop Ping from the \"bad\" net zone.. and prevent your log from being flooded..", "action": "ACCEPT", "source": "fw", "dest": "net", "proto": "icmp" } ] }
- Setting tunnels:
"shorewall": { "tunnels": [ { "type": "ipsec", "zone": "net", "gateway": "0.0.0.0/0", "gateway_zones": "vpn" } ] }
- Setting Masquerade
"shorewall": { "masq": [ { "interface": "eth0", "source": "192.168.0.0/24" } ] }
- Setting SNAT
"shorewall": { "masq": [ { "interface": "eth0", "source": "192.168.0.0/24", "address": "1.2.3.4" } ] }
Configuration
The following is a typical example of output (in this case, for a rules file):
#
# Shorewall version 5 - Rules File
#
# For information on the settings in this file, type "man shorewall-rules"
#
# The manpage is also online at
# http://www.shorewall.net/manpages/shorewall-rules.html
#
############################################################################################################################
#ACTION SOURCE DEST PROTO DEST SOURCE ORIGINAL RATE USER/ MARK
# PORT PORT(S) DEST LIMIT GROUP
#SECTION ESTABLISHED
#SECTION RELATED
SECTION NEW
# Allow all from VM host
ACCEPT net:10.0.2.2 fw - - - - - - -
# Incoming SSH to firewall
ACCEPT all fw tcp 22 - - - - -
# Allow database load-balancer db1.vguest access to repmgr monitor
ACCEPT lan:192.168.123.10 \
fw tcp 5480 - - - - -
Note how line continuations are added as necessary to keep column alignment in place.
Contributing
I am very happy to accept this PRs or work on issues to extend the usage of this cookbook.
Just use the issue queue or even better, create pull requests for what you like to improve.
Testing
You can run the test using kitchen
chef exec kitchen converge
There are to test suites, default
for testing shorewall5
to ensure we can install shorewall5 e.g. for docker support.
Credits
This cookbook is heavily based on the nowdays no longer maintained cookbook https://github.com/demonccc/chef-shorewall_reloaded - thank you for you hard work Claudio!
License and Authors
Author:: Eugen Mayer (eugenmayer on github)
Old Author:: Claudio Cesar Sanchez Tejeda demonccc@gmail.com
Copyright:: 2017, Eugen Mayer
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
Dependent cookbooks
apt >= 0.0.0 |
Contingent cookbooks
There are no cookbooks that are contingent upon this one.
shorewall_ng CHANGELOG
0.4.0
- removed old shorewall5 recipe since we only support 5.x anyways
- remove old shorewall 4.x leftovers, since it is unsupported anyway
- remove [shorewall][version] variable since it is never used at all
- test against debian buster
- ensure compatibility with buster and stretch at the same time ( shorewall 5.0 and 5.2 )
- fix support for chef client 14+
0.3.1
- Support 5.0 and 5.1+ installations, yet detected by disto version
0.3.0
- Upgraded configuration to 5.1 / 5.2 standards, removed all deprecations
0.2.0
- removed shorewall4 support
- fixed bug with symbol vs string access using hash.fetch
0.1.2
- important readme adjustments
0.1.1
- source_url / issue_url
0.1.0
- Intial release of shorewall_ng with shorewall5 support